Why Is Shielding Important in Instrument Cable?

Instrument Cable
Instrument Cable is an important part of an instrumentation system because it carries signals from sensors, transmitters, or measurement devices to the control system. During this process, signal quality can be affected by electromagnetic interference or electrical noise, particularly when cables are installed in industrial environments with numerous electrical devices. Therefore, using shielding in instrument cable is an important aspect to consider to help maintain signal integrity during transmission.
What Is Shielding in Instrument Cable?
Shielding is a protective layer incorporated into the cable construction to help reduce the influence of electromagnetic interference from the surrounding environment on signals passing through the conductors.
In instrumentation systems, transmitted signals generally have specific characteristics and can be more susceptible to interference from other equipment. Shielding works as part of the cable construction to help limit the interference reaching the conductors, allowing signal transmission to remain more consistent.
How Does Shielding Work?
When an instrument cable is installed near a source of electromagnetic interference, electrical or electromagnetic fields generated by that equipment can affect the conductors inside the cable. The shielding layer helps reduce the exposure of the conductors to this interference.
In addition to shielding, twisted pair construction in instrument cable can also help reduce the effects of external interference. The cores are twisted together in pairs so that both conductors receive similar interference characteristics, helping minimize its effect on the transmitted signal.
Interference That Can Affect Signals
Industrial environments commonly contain various types of equipment that generate electromagnetic fields. These conditions should be considered when designing an instrumentation system and selecting the appropriate cable type.
Common sources of interference include:
Electric motors operating near cable routes can generate electromagnetic fields.
Power cables carrying high currents can create electromagnetic effects on signal cables installed too close to them.
Inverters and variable frequency drives can generate frequency components that may affect signal transmission.
Switching equipment can produce electrical disturbances that may influence instrumentation circuits.
If these disturbances are not properly managed, signals received by the control system may experience changes or instability, potentially affecting the consistency of instrument readings.
Functions of Shielding in Instrument Cable
Shielding has several functions related to protecting signal transmission in instrumentation systems.
1. Helps Reduce Electrical Noise
The primary function of shielding is to help reduce the influence of electrical noise originating from the surrounding environment. This is particularly important in installations containing numerous electrical devices and different types of cable routes.
2. Supports Stable Signal Transmission
By reducing the influence of external interference, shielding can help maintain the quality of signals transmitted from instruments to the control system. This is important for processes that require consistent parameter monitoring.
3. Supports Instrumentation System Reliability
Instrument cable with suitable shielding construction can be part of an overall interference management strategy. However, its effectiveness also depends on system design, installation methods, grounding, and environmental conditions.
Understanding ISCR and OSCR in Instrument Cable
Certain constructions, such as CU/PE/ISCR/OSCR/PVC FR instrument cable, incorporate shielding layers as part of the overall cable structure.
ISCR and OSCR
ISCR and OSCR are components of the shielding construction in instrument cable. In general, these layers provide additional protection against interference from the surrounding installation environment.
The cable construction may also include a copper conductor (CU), polyethylene (PE) insulation, paired cores, and an outer PVC FR layer. Each component has a different function and works together to support signal transmission requirements.
Also read: Instrument Cable vs Power Cable What Is the Difference?
When Is Shielded Instrument Cable Needed?
The use of shielded instrument cable should be considered when signal or communication routes are installed in environments with a potential for significant electromagnetic interference.
Several conditions should be taken into account, including:
Cable routes are located near power cables
Separating signal and power cable routes can help reduce the potential for interference.Areas contain numerous electrical devices
Motors, inverters, control panels, and switching equipment should be considered when selecting the appropriate cable construction.The system requires consistent signal transmission
In monitoring and control systems, signal quality is an important factor in maintaining processes within their intended operating parameters.
Factors to Consider During Installation
Shielding is not the only factor that determines signal transmission quality. Proper installation also plays an important role.
Several aspects should be considered:
Separate instrument cable routes from power cables whenever possible.
Avoid installing cables too close to strong interference sources.
Consider the appropriate grounding and shielding termination methods according to the system design.
Avoid excessive bending, pulling, or installation practices that do not comply with the cable specifications.
Use clear core identification to make installation and maintenance easier.
Conclusion
Shielding in instrument cable plays an important role in helping reduce the influence of electrical noise and electromagnetic interference on signal transmission. Selecting a construction such as CU/PE/ISCR/OSCR/PVC FR should be based on the system requirements, signal type, installation environment, and installation method. By understanding the function of shielding and other supporting factors, instrumentation systems can be designed and installed more appropriately and systematically.
